返回首页

唐县铜雕生产厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
平时我们要如何保养铜鼎
添加时间:2019/11/25 15:21:32     浏览次数:
1.要尽量将铜鼎放在干燥、没有灰尘和空气污染的地方。
1. Try to place the tripod in a dry place without dust and air pollution.
2.如果铜鼎上面有尘埃,要用柔软干净的棉布片擦干净,注意要小心一点,棉布片擦不到的地方要用柔软的毛刷刷去。
2. If there is dust on the copper tripod, use soft and clean cotton cloth to clean it. Pay attention to be careful, and use soft brush to clean the place where the cotton cloth can not be wiped.
3.要避免铜鼎没有必要的磕碰,注意平时的维护。
3. Avoid unnecessary collision of copper tripod, and pay attention to normal maintenance.
4.把铜鼎和油类、酸类等容易产生氧化的化学物品隔开。
4. Separate Tongding from oil, acid and other chemicals that are prone to oxidation.
5.在搬动铜鼎的时要戴上棉丝手套,以免被人体的汗液腐蚀,不能用手直接触碰。
5. When moving the copper tripod, wear cotton gloves to avoid being corroded by the sweat of human body, and do not touch it directly by hand.
上一页  4000多斤的铜钟悄然入住钟楼  
下一页  不同的事情对铜钟的敲打次数也是不一样的
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品中心

Copyright © 技术支持:遨游网络

  • 一键拨号
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品中心