铜雕工艺品如何保养，铜雕工艺品，工艺品的一种。工艺品，手工艺的产品，即通过手工将原料或半成品加工而成的产品，是对一组价值艺术品的总称。 How to maintain, bronze carving handicraft, handicraft. The product of handicraft, handicraft, the product that is made by hand of raw material or semi-finished product, is the general term of a group of value art. 　　铜雕工艺品如何保养，铜雕工艺品，工艺品的一种。工艺品，手工艺的产品，即通过手工将原料或半成品加工而成的产品，是对一组价值艺术品的总称。那么铜雕工艺品如何保养呢? How to maintain, bronze carving handicraft, handicraft. The product of handicraft, handicraft, the product that is made by hand of raw material or semi-finished product, is the general term of a group of value art. How to maintain the bronze carving arts? 　　保持铜雕原貌，有个收藏保管问题，铜雕在地下经过长期腐蚀氧化，质地已不坚固，特别是半脱胎铜雕，甚至比瓷器还易损，因此对铜雕妥善保存，防止出土后受损，对投资者来说十分重要。 Tripod for same, there is a collection takes care of the problem, tripod in the ground after a long oxidation corrosion, quality of a material is not strong, especially in half a tripod, and even than China still vulnerable, so the tripod for properly kept, prevent damaged after unearthed, is very important for investors. 　　出土的铜雕经常是泥锈混浊，纹饰不清，进行适当的清洗，让泥土自行脱落，而后用小毛刷轻轻刷洗，遇到有影响纹饰的土锈，可用小竹签慢慢剔除，切忌用铜刷或硬毛刷着力刷洗，更不能用利器清理打磨，否则会毁坏铜雕，而失去收藏价值。 Unearthed bronze sculptures are often mud rust opacity, decorative pattern is not clear, proper cleaning, let the earth to fall off, and then gently with small hair brush scrub, rust influence grain have encountered the soil, available small bamboo sticks out slowly, avoid by all means use copper brush or scrub brush to scrub, more can't use polishing tool is clean, otherwise it will destroy tripod, lost collection value. 　　那么如何对铜雕工艺品进行保护保养呢? How to protect the bronze carving arts and crafts? 　　①氧化银法。用氧化银与氧化亚铜接触，封闭氯化亚铜的暴露面，达到控制腐蚀铜雕的目的。先用机械方法，剔除粉状锈，露出灰白色蜡状物氯化亚铜。然后将氧化银与酒精调成糊剂，涂在氯化亚铜表面，并置于潮湿环境中,使其充分作用,形成氧化亚铜和氯化铜，覆盖氯化亚铜表面。两者皆为稳定性盐,如此多次操作,直至将器物置于高湿环境中仍不出现粉状锈的腐蚀点为止。此法适于斑点状局部腐蚀的器物及有金属镶嵌物的器物。 The silver oxide act. In contact with cupric oxide and copper oxide, the exposed surface of chlorinated cupric was sealed and the purpose of controlling the corrosion of the bronze was achieved. First, the powder rust is removed by means of mechanical method. Then dispatch silver oxide and alcohol into a paste, coating on the surface of cuprous chloride, and put in damp environment, make its full role, formation of cuprous oxide and cupric chloride, covering the surface of cuprous chloride. Both are the stability salts, so many operations, until the object is placed in a high wet environment where the powder rust is still not present. This method is suitable for the object of speckled local corrosion and the object of metal inlays.